Stainless Steel Square Hole Mesh Manufacturer

Stainless Steel Square Hole Mesh

Square hole mesh features orthogonal warp and weft wires of equal spacing, forming precise square openings. Anping CREMOTIVE produces both woven and welded square mesh in 304 and 316L stainless steel. Woven meshes range from 0.5 mm × 0.5 mm to 5 mm × 5 mm openings; welded mesh panels span 5 mm × 5 mm up to 25 mm × 25 mm.

Fabrication Methods

• Woven Mesh: Precision looms interlace wires under controlled tension to maintain ±5 % aperture accuracy. Crimped variants enhance rigidity for high‑strain applications.

• Welded Mesh: Spot‑welded intersections provide high shear strength and minimal elongation, suitable for fencing and structural reinforcement.

Performance Characteristics

• Consistent Opening Sizes: Ideal for laboratory sieves, paint‑sprayer screens, and architectural infill.

• High Open‑Area Ranges: 20 %–60 % depending on wire gauge and aperture.

• Mechanical Durability: Welded mesh panels withstand loads up to 5 kN/m² without deformation.

Applications

• Laboratory & Research: Precision test sieves and sample preparation trays.

• Architectural Cladding: Decorative façades, sunshades, and interior balustrades that combine airflow with aesthetic patterns.

• Security & Fencing: Perimeter panels, machine guards, and protective barriers.

Customization & Finishing
Panels up to 2 m × 6 m; roll widths up to 2 m. Edge treatments include folded hems and welded frames. Optional finishes include electropolishing, powder‑coating, and anodic oxide after plating for specialized colors.

Maintenance
Woven mesh panels clean easily with water or mild detergents; welded panels resist heavy loads and can be cleaned with pressure washers or abrasive cleaning without loss of integrity.