Temporary Chain Link Fence for Construction Sites

Temporary Chain Link Fence for Construction Sites

Anping CREMOTIVE Wire Mesh Products CO., LTD supplies temporary chain link fence systems specifically engineered for construction sites, where safety, accessibility, and quick installation are critical. Our temporary fences feature 2 m‑high panels woven from 2.5 mm hot‑dip galvanized steel wire in a diamond pattern, offering a secure barrier against unauthorized entry, debris migration, and accidental falls. Each panel integrates with a 32 mm × 1.5 mm galvanized tubular frame that resists bending under incidental contact by machinery or materials.

Modular Design & Installation
Panels are pre‑assembled and delivered with interlocking couplers and tension bars. Crews can erect a 50 m run on flat or slightly uneven ground in under two hours without the need for concrete footings. Temporary feet—fabricated from rebar‑sturdy steel plate—simply slot into panel bases, providing stability while allowing easy repositioning. Where additional anchoring is required, optional ground anchors or sand‑ballast bags attach to the feet, ensuring that wind loads or accidental impacts do not compromise fence alignment.

Site Safety & Compliance
In compliance with OSHA and EN 13374 regulations governing perimeter safety, our temporary chain link fences meet minimum height and mesh‑spacing criteria to prevent both human intrusion and the egress of small tools or materials. High‑visibility safety caps installed atop each vertical tube reduce the risk of injury. Reflective tape or warning signage can be affixed to the mesh, improving nighttime visibility for on‑site personnel and passersby.

Durability & Reuse
All steel components undergo continuous hot‑dip galvanizing with zinc coatings of 80–120 g/m² for corrosion protection in exposed environments. Mesh panels and frames have achieved over 1,000 hours in salt‑spray testing, making them suitable for coastal projects. After project completion, panels can be dismantled, cleaned, and stored under cover for reuse on subsequent sites, optimizing capital investment and reducing waste.

Customization & Support
Anping CREMOTIVE offers panel heights from 1.2 m to 2.4 m, wire gauges from 2.0 mm to 3.5 mm, and mesh apertures from 50 mm to 100 mm. Our technical team provides site‑specific layout plans, wind‑load calculations, and installation guidance. For long‑term projects, service agreements include periodic inspections and on‑demand delivery of replacement feet or connectors to maintain site safety continuously.