Wire Mesh Products

Orifice Corrugated Packing maintains the structural characteristics of the corrugated packing of the metal wire mesh, and is made of the orifice plate with grooves on the surface. The gas-liquid flow path is specified, and the phenomenon of groove flow and wall flow is improved. The pressure drop can be very small. At the same time, it provides more specific surface area, and can achieve higher mass and heat transfer effects in the same volume.

It is assembled by vertical superposition of wire mesh corrugated sheets, and there are two kinds of corrugated inclination angles of 30° and 45°, respectively called X type and Ya type. The advantages of this filler are reduced pressure, high flux, high mass transfer efficiency, small liquid holdup and small amplification effect.

Material: high quality stainless steel wire
Weaving: contrast weaving
Features: smooth surface, high hardness, not easy to deform, high temperature resistance, low temperature resistance, corrosion resistance, flexibility, excellent filtration performance, good filtration precision, high loading capacity.

Dense wire mesh has different diameters of warp and weft filaments, and different mesh numbers. Reasonable matching of the warp and mesh to achieve the square mesh can not reach the filtration density. Therefore, mesh mesh is a fine filtration dense mesh, but generally the diameter of the warp wire is larger than the diameter of the weft wire. Contrast weaving method is called contrast because the weft threads are much thicker than the warp threads. (Mesh mesh to achieve the general stainless steel mesh is impossible to achieve the filtration precision)