China Blue Square Wire Mesh Supplier

Blue Square Wire Mesh Factories

Anping CREMOTIVE Wire Mesh Products CO., LTD operates dedicated blue square wire mesh factories that specialize in producing high‑quality, color‑coated stainless steel and carbon steel square mesh panels. These facilities integrate welding, weaving, pre‑treatment, powder‑coating, and quality‑inspection lines to deliver consistently finished blue mesh used in architectural, agricultural, and industrial applications.

Material Selection & Wire Preparation
Production begins with selecting the base wire—commonly 304 or 316L stainless steel for corrosion resistance, or carbon steel for cost‑sensitive uses. Wire diameters typically range from 0.8 mm to 3.0 mm, drawn to tight tolerances (±0.02 mm) on automated drawing benches. After drawing, wires pass through shot‑blasting to remove scale and ensure uniform coating adhesion.

Mesh Formation & Welding
In our specialized blue mesh factories, two primary methods produce square openings:

1. Welding: Straight longitudinal and cross wires are precisely aligned and resistance‑welded at each intersection, creating rigid panels. Spot‑weld currents are programmed to minimize heat‑affected zones and preserve coating integrity.

2. Weaving: For applications requiring slight flexibility, crimped warp and weft wires are woven on computerized looms before welding or finishing.

Pre‑Treatment & Powder Coating
Welded or woven panels are cleaned through alkaline wash and deionized‑water rinse to remove oils and contaminants. Next, panels undergo chemical phosphating to improve powder adhesion. Blue polyester powder, formulated with UV stabilizers, is electrostatically applied in an enclosed booth. Curing ovens maintain a consistent 180 – 200 °C profile, resulting in a uniform finish that resists chalking and corrosion.

Quality Control & Testing
Every production lot is inspected for:

• Coating Thickness: Measured with non‑destructive gauges to ensure 60 µm – 80 µm coverage.

• Color Uniformity: Checked under D‑65 lighting to match RAL or Pantone specifications within ΔE ≤ 2.

• Weld Integrity: Random panels undergo pull‑tests at 100 N per weld to verify spot‑weld strength.

• Aperture Accuracy: Optical scanners confirm square openings within ±5 % of nominal dimensions.

Applications of Blue Square Mesh

• Architectural Screens: Sun‑shade louvers, balcony safety guards, and decorative façades.

• Playground and Sports Equipment: Fencing around courts and playground structures, where vibrant color enhances visibility and aesthetics.

• Signage and Displays: Back‑lighting panels and retail displays that require durability and color continuity.

• Corrosion‑Prone Environments: Coastal or chemical‑processing locations where blue coating adds an extra corrosion barrier.

By combining in‑house metalworking and coating capabilities, Anping CREMOTIVE’s blue square wire mesh factories deliver large‑volume, color‑consistent products that meet both functional and design demands.