Stainless Steel Filter Screen Mesh

Stainless Steel Filter Screen Mesh

Stainless steel filter screen mesh from Anping CREMOTIVE Wire Mesh Products CO., LTD is engineered for reliable particulate separation in liquid and gas streams. Screen mesh—characterized by uniform square or rectangular openings—is fabricated via weaving or welding techniques to achieve consistent cut‑points and mechanical stability.

Weave Designs & Open‑Area Optimization

• Plain Screen Mesh: Provides a balanced, symmetrical aperture, with open‑area ratios between 25 % and 50 %.

• Dutch Screen Mesh: Fine-level screening with open area up to 45 %, capturing particles as small as 10 µm.

• Twill Screen Mesh: Diagonal flow path reduces clogging; open‑area up to 55 %.

Material and Dimensions

• Alloys: 304 for general use; 316L for chloride‑rich or sanitary conditions.

• Hole Sizes: 0.5 mm to 20 mm (square or slit openings).

• Panel Formats: Cut‑to‑size panels, cylinders for filter vessels, and conical screens for separators.

Applications

• Water Treatment: Prefiltration screens to remove debris and protect membranes.

• Chemical Processing: Catalyst support screens and slurry classification.

• Food & Beverage: Hygienic screen baskets in tanks and pipelines; easy‑clean electropolished finishes.

• Air Filtration: Pre‑filters in HVAC and industrial dust collectors.

Fabrication & Inspection
Screen mesh is woven on precision looms or welded under controlled current to minimize heat‑affected zones. Post‑production, each panel is:

• Dimensionally Inspected via laser measurement.

• Surface‑Checked for weld integrity and passivation quality.

• Flow‑Tested in lab rigs to verify pressure‑drop performance under specified flux.

Maintenance Recommendations
Screen mesh panels can be back‑flushed, chemical‑soaked, or ultrasonic‑cleaned. Routine inspections of aperture integrity and frame seals ensure long service life and consistent separation performance.